제목 없음

기술 지원
1

파이널판타지 아이템으로 중계서버를 선택하고 설정을 한뒤, 확인을 해보면 다른 중계서버로 연결되어있다고 나오네요.
나의IP는? 아이템에서도 중계서버를 변경하니 변경이 되네요. . .
항상 두개를 같이 변경해야하는건가요?

2

아… http://myip.mudfish.net 사이트는 항상 ‘나의 IP는?’ 아이템에 대해서만 반응하는 사이트입니다. 즉, 파이널 판타지 아이템의 중계 서버를 변경하신다고 결과가 바뀌는 것이 아닙니다.

파이널 판타지 아이템 설정이 변경을 한 후 해당 부분이 진짜 적용이 되는지는 글쎄요… 해당 게임 클라이언트가 접속 IP 를 보여주는 기능이 있다면 그것으로 가능할 듯 합니다만, 그 외 다른 꽁수가 있을지 상상이 안가네요.

3

:slight_smile: Please check http://mudfish.net/forums/6/topics/11146 link and try it again whether it’s fixed now.

4

hi. earlier I managed to run the game with fast connect on, the problem though is that the loading time when changing maps takes too long compared when I run the game without mudfish (like 1 - 2 mins longer) and after I rebooted my computer its no longer working.

I tried full vpn, choosing US East atlanta (tried both of them) but still no luck. game stuck at loading screen. I waited for as long as 15 mins and nothing changed.

as for your question, I don’t think I’ve tried using a specific mudfish node for ToS before.

thanks, hope you can give further advise

5

HI… I am currently not using the fastconnect mode but still able to play the game.

do I need to switch back to UDP connection protocol before trying to use mudfish nodes?

6

HI.. I am currently not using the fastconnect mode but still able to play the game.

If basic functionality of mudfish is working (e.g. communicating packets from your desktop to mudfish node), it doesn’t be matter enabling / disabling FastConnect mode.

> do I need to switch back to UDP connection protocol before trying to use mudfish nodes?

Yes or no if you’re only playing ToS. However using UDP protocol is more efficient to communidate than TCP.

> and any link on how to find or fix any MTU issue I might be having?

Please check MUDEC_00262 link about details. Or you can try to use http://www.iea-software.com/products/mtupath.cfm to figure out about your MTU.