설절하고 크롬으로 시작하면 왜 배틀빌드4가 실행이 안돼는겁니까… 그리고
왜 답변을 안해주시는지 회사 전화도 안돼고 답변이라고 해주셔야 방법을 찾아서 해결할거 아닙니까
안녕하세요? 미꾸라지팀 입니다. 먼저 불편을 드려서 죄송합니다. 저희가 답변을 드리다가 실수로 빠트린것 같습니다. ㅠ.ㅠ 그리고 저희는 전화 문의는 받지 않고 있음을 양해 부탁드립니다.
일단 제가 hby2300 님 로그를 확인해보니 MUDEC_00044 와 MUDEC_00045 에러가 보이는데 링크를 참조하셔서 해당 문제를 해결해 보시길 바랍니다. 그리고, 배틀필드4 아이템의 중계서버 설정은 한국으로 되어있는데, full vpn 의 중계서버 설정은 일본으로 되어 있는 것으로 확인됩니다. 이럴 경우 full vpn의 중계서버가 우선권을 가지게 되어 일본 중계서버를 통해서 접속되게 되는데, 배틀필드4가 지역 제한이 걸려있을 경우 접속이 안되실 수 있습니다. full vpn모드를 끄고 하시던지, 중계서버를 한국으로 변경해주시면 될것 같습니다.
How to lower RTT using loach
Basically, if you do not use loopholes, usually packets are usually sent from ‘My Computer’ to ‘Game Server’. However, if you use loach, you have the option to change this delivery method, usually by saying “bypass”. Currently available options in Dojo v4 are:
Basic Mode - Bypass Method Through One Relay Server
Basic mode + FastConnect mode - Bypass method through one relay server
Relay server advanced mode - Bypass method through two relay servers
Relay server Advanced mode + FastConnect mode - Bypass method through two relay servers
Basic mode
If no setting is made, it is set by default. If you explain it in terms of Dojoji v4, if you purchase item through ‘Item -> Purchase Item’ menu, it will be set as default.
If you click on an item in the ‘Dashboard’ or click the item in the ‘Item -> Manage Item’ menu, you can see the configuration screen and select the relay server you want to use in the corresponding tab. The default value is ‘Auto Select’.
Click the magnifying glass icon to see the RTT graph between ‘My Computer <-> Relay Server <-> Destination’ for that item.
Before testing with other combinations, be sure to set up a different relay server in the basic mode.
Basic mode + FastConnect mode
This combination is set according to whether FastConnect mode is enabled or not. Please refer to the FastConnect mode document for details.
Relay server advanced mode
This mode changes the relay server using ‘Basic Mode’ above, and it is a method that can be tried when there is no other effect even though it is tested.
In v4, when you enter the ‘Settings’ menu of the item, you will see ‘Advanced Mode’ in the relay server selection option. You can specify two relay servers that you want to use. If you are having trouble deciding which relay server to assign, you can get more help by using the magnifying glass icon next to it.
For more information, please refer to the Relay Server Advanced Mode section.
Relay server advanced mode + FastConnect mode
Currently this combination is the mode that is in development, but it is theoretically possible, but it is not tested properly.