Auto path takes forever (n_checked xxxx)

[rotateaxis]

Hello, my use case is a game server in Karachi (PK). I use mudfish since years, but usually I use it manually. Since this host has weird routing, i decided to use the Auto path (basic) but it is taking forever. It is currently at 1700 nodes checked in 6 hours+. I let it run because I thought it would just ping from <700 servers.

The destination server is the same ipv4 as the game host server.

Under item config I have checked:

Flow controller log:
Tue, 10 Sep 2024 15:53:40 GMT [957.354337] rttd [INFO] MUDEC_00774: UDP: select timeout for 103.27.184.118:10007
.
.
.
Tue, 10 Sep 2024 21:17:44 GMT [20401.253758] rttd [INFO] MUDEC_00774: UDP: select timeout for 37.252.1.97:10007

However I don’t suspect this is the problem because my ISP has a packet loss issue about every 30 seconds.

What’s going on? Is this normal behavior? Did I config wrong?

[weongyo]

Please confirm that How to check the basic functionality works fine in your environment. It’s the first thing you should test.

However if the basic functionality works fine but still “auto configuration” stucks at 10%, please send me Problem Report. I need to check the internal logs.