i cannot check node advanced mode, it says "too many request"
Please wait for 10 seconds to 5 minutes.
still the same
Not enough information to calculate shortest pathes.
Are you running mudfish under the network firewall? When I checked your configuration, it seems no user RTT information between mudfish nodes are available. It's the reason why "Not enough information to calculate shortest pathes." message is printed.
Could you please try to change "RTT Checking Method" found at "Setup -> Program" menu?
its alr the method i used, it was happening after i update to v4.6.0
- change your node
https://mudfish.net/forums/6/topics/44662
-
Connection Protocol in TCPs
https://mudfish.net/forums/6/topics/37597
- consider to change MAC Address
- consider reducing MTU from 1450
- run Mudfish with option lowercase `-s`
then access to https://ui.mudfish.net:8282
- connect with Mudfish DNS Client If Mudfish DNS Client doesn't work,
- gpedit.msc - Local Computer Policy - Computer Configuration - Administrative Template - Network - DNS Client - Turn off smart multi-homed name resolution - Enabled - OK
- Control Panel\Network and Internet\Network Connections - TAP-Win32 Adapter V9 - Internet Protocol Version 4(TCP/IPv4) Properties - General - Advanced... - IP Settings - Automatic metric - Interface metric - recommended 15
- use capital `-O` option to change the Mudfish's working method as refer Firewall - Mudfish Master Server
- China https://mudfish.net/forums/6/topics/44662 https://mudfish.net/forums/6/topics/37597
sry for the late reply,
yes it worked now thank you guys
Cool! :-) I hope now everything goes well with mudfish. Please let me know if there are any other problems.