-I실행옵션이 제대로 적용되지 않는듯합니다

기술 지원
#1

피시방에서 어뎁터 v9설치는 되나 연결이 안돼 -I 옵션으로 켰는데 1168에러를 뿜고 연결이 되지 않습니다. 애초에 -I옵션이 제대로 적용이 안되는거 같습니다. 프로세스 첨부합니다.

[STDOUT]

[0.000997] [INFO] mudfish v5.4.4 (for x86_64)

[0.001995] [INFO] Timestamp: Sun Jun 13 18:27:33 2021



[0.001995] [INFO] Connection protocol: udp

[0.001995] [INFO] Authenticating...

[0.019947] [INFO] Fetching the static nodes...

[0.683172] [INFO] Fetched 531 static nodes from the master.

[0.685167] [INFO] TAP-Win32 Driver GUID {BF0AC6B1-6895-468E-88CF-5F36458F1DD5}

[0.685167] [INFO] TAP-Win32 Driver Version 9.9 

[0.685167] [INFO] TAP-Win32 Driver MTU 1500

[0.685167] [INFO] Setting TAP-Win32 Adapter v9's MTU to 1400

��Ұ� �����ϴ�.





[0.733039] [INFO] TAP-Win32 Driver TcpNoDelay disabled

[0.733039] [INFO] TAP-Win32 Driver TcpAckFrequency 1

[0.733039] [INFO] TAP-Win32 Driver TCPNoDelay 1

[0.735034] [INFO] Uses the macaddr for msk(4) (cached).

[0.736031] [INFO] Ready

[0.836789] [INFO] Listening the management console at 127.0.0.1:50805

[1.737354] [INFO] Setting IP address 10.254.39.13 without DHCP client

[1.737354] [ERROR] MUDEC_00464: AddIPAddress() failed: 1168

[1.739348] [INFO] MFP     0 RouteAdd     - 108.177.0.0 255.255.128.0 545 129543 0 n -1

[1.739348] [INFO] Fetching new static node SID 545...

[1.849055] [INFO] re420: Connected to 203.76.245.186:10008 (UDP)

[1.849055] [INFO] MFP     0 RouteAdd     - 13.104.0.0 255.252.0.0 545 129543 0 n -1

[1.849055] [INFO] MFP     0 RouteAdd     - 13.64.0.0 255.224.0.0 545 129543 0 n -1

[1.849055] [INFO] MFP     0 RouteAdd     - 13.96.0.0 255.248.0.0 545 129543 0 n -1

[1.850052] [INFO] MFP     0 RouteAdd     - 153.254.0.0 255.254.0.0 545 129543 0 n -1

[1.850052] [INFO] MFP     0 RouteAdd     - 172.217.0.0 255.255.0.0 545 129543 0 n -1

[1.850052] [INFO] MFP     0 RouteAdd     - 202.234.44.0 255.255.252.0 545 129543 0 n -1

[1.850052] [INFO] MFP     0 RouteAdd     - 216.239.32.0 255.255.224.0 545 129543 0 n -1

[1.850052] [INFO] MFP     0 RouteAdd     - 216.58.192.0 255.255.224.0 545 129543 0 n -1

[1.851049] [INFO] MFP     0 RouteAdd     - 34.64.0.0 255.192.0.0 545 129543 0 n -1

[1.851049] [INFO] MFP     0 RouteAdd     - 35.192.0.0 255.240.0.0 545 129543 0 n -1

[1.851049] [INFO] MFP     0 RouteAdd     - 40.112.0.0 255.248.0.0 545 129543 0 n -1

[1.851049] [INFO] MFP     0 RouteAdd     - 40.120.0.0 255.252.0.0 545 129543 0 n -1

[1.851049] [INFO] MFP     0 RouteAdd     - 40.124.0.0 255.255.0.0 545 129543 0 n -1

[1.851049] [INFO] MFP     0 RouteAdd     - 40.125.0.0 255.255.128.0 545 129543 0 n -1

[1.851049] [INFO] MFP     0 RouteAdd     - 40.64.0.0 255.248.0.0 545 129543 0 n -1

[1.852084] [INFO] MFP     0 RouteAdd     - 40.74.0.0 255.254.0.0 545 129543 0 n -1

[1.852084] [INFO] MFP     0 RouteAdd     - 40.76.0.0 255.252.0.0 545 129543 0 n -1

[1.852084] [INFO] MFP     0 RouteAdd     - 40.80.0.0 255.240.0.0 545 129543 0 n -1

[1.852084] [INFO] MFP     0 RouteAdd     - 40.96.0.0 255.240.0.0 545 129543 0 n -1

[1.852084] [INFO] MFP     0 RouteAdd     - 51.103.0.0 255.255.0.0 545 129543 0 n -1

[1.852084] [INFO] MFP     0 RouteAdd     - 51.104.0.0 255.254.0.0 545 129543 0 n -1

[1.853045] [INFO] MFP     0 RouteAdd     - 51.140.0.0 255.252.0.0 545 129543 0 n -1

[1.853045] [INFO] MFP     0 RouteAdd     - 51.144.0.0 255.254.0.0 545 129543 0 n -1

[1.853045] [INFO] MFP     0 RouteAdd     - 52.112.0.0 255.252.0.0 545 129543 0 n -1

[1.853045] [INFO] MFP     0 RouteAdd     - 52.224.0.0 255.224.0.0 545 129543 0 n -1

[1.853045] [INFO] MFP     0 RouteAdd     - 52.96.0.0 255.240.0.0 545 129543 0 n -1

[1.853045] [INFO] MFP     0 RouteAdd     - 74.125.0.0 255.255.0.0 545 129543 0 n -1

[1.854042] [INFO] MFP     0 FlowMTU      - 14.63.214.216 1500

[STDERR]

Empty file.
#2

AddIPAddress() 함수가 1168 를 반환하였다는 것은 ERROR_NOT_FOUND 오류를 나타냅니다. TAP-Win32 adapter v9 네트워크 장치가 제대로 설치는 진행이 된 듯 보이는데요, DHCP 가 제대로 동작하지 않기 때문에 -I 옵션을 사용하실려고 하신 것인가요?

#3

This topic was automatically closed 21 days after the last reply. New replies are no longer allowed.